10/14/2007Fuzznoggin' Creations
Interested ? Contact me for a price!
Hours: 5:00pm to 10:00pm EST - M to F : Closed Holidays
Customer Service Number - (703)-675-0214
Updated 02/25/2008
Polar Lights 1:350th Enterprise is NO LONGER OFFERED
VERY IMPORTANT - PLEASE READ
Fuzznoggin'Creations is an independently owned and operated build service. If you are interested in a price quote, I am willing to discuss prices on your build via the Customer Service number only. Why is this? Every model has it's differences in the amount of detail, man hours, and personal attention spent in creating the best possible model for you. We offer a 99% seamless model done as accurate as possible. I cannot knock these out in just a week or two. Some take a few months to complete. Please, do not compare my price quotes to that of what you see, at times, on eBay. Doing so is like comparing apples to eggplants. Many so called "Pro-Built" models are chock full of seams, light leaks, lack aftermarket parts for accurization, lack well prepared illumination, sound, etc; and you will only be set up for bitter disappointment with a "sub-par model" at a bargain basement price. I have references available from my previous customers (upon request) to vouch for the quality of my builds. Building and illuminating models is an art. There are personal touches to these kits. Each one is different and is unique in it's own way. As a customer, you are part of the initial process when requesting special enhancements, etc. So, if you are a serious collector looking for a sharp, accurate, and well built kit...then look no further.
STATUS REPORT: 10/14/2007
Slots are now filled completely for 2008 and through the fourth quarter of 2009.
Custom Black LEXAN bases are available for all builds. Museum quality, mirror gloss finish!
Build Services Offered For The Following:
10/14/2007
DeBoer's 46" Enterprise NCC-1701-A
High quality LEDS, flashing Navigation/Strobe circuitry, Interior Illumination, pulsating Photon Torpedo Launchers with sound, Illuminated Warp Nacelles and Impulse Drive, Spot Lights, 2 phase Deflector Dish lighting circuitry, and ship wide Thruster Arrays. This is a large, labor intensive, and very detail oriented model. Custom shuttle bay offered as well as arboretum, VIP lounge, and Recreation deck. Estimated build time is 7 to 10 months. A choice between an economy ABS base or optional Museum Quality Lexan base is available. Contact us for the latest exciting options to enhance your build.
Customer would have to supply the kit as it is no longer being produced.
1:650 USS Enterprise 1701-E
From the skilled craftsmanship of Sovereign Replicas, the premium, highly detailed, and made from a clear fiberglass/resin casting of the 1701-E. Custom illumination along with optional Sound Effects.
Kit not in stock but may be ordered
AMT/Ertl Enterprise C
Lit up as much as possible, averaging 600 to 1000 windows hand drilled out. Removable swivel stand on customized base with flashing navigation lights. Time consuming build but I consider it "The Best of the Ertl Kits"!!!
*Sound effects card optional
Kit in stock
AMT/Ertl Danube Class Runabout
As is with just Nacelle, Impulse, and Navigation lights, Additional original scratch built interior and interior lighting available. Sound effects card optional. Comes with removable 360 swivel stand on customized base. One of my personal specialty builds!
Monogram Marquis Ship
Monogram's Marquis Ship, fully illuminated, after market enhancement parts, and custom base with swivel stand.
Kit in stock
FuzznogginCreations no longer offers build services on the following kits:
- Polar Lights 1:350th Enterprise 1701 A - Polar Lights 1:350th Enterprise NX-01
- AMT/Ertl kits (except those listed above)
I will be happy to recommend a reputable builder to assist you with these kits
Important Stuff You Need To Know
Disclaimer - As with any quality replica built by FuzznogginCreations, these are not toys nor are they to be used in lieu of night lights, lamps, etc. To preserve the longevity of the model's illumination and circuitry, it is strongly suggested that the illumination time frame be limited to no more than 30 minutes on. Although LEDs produce a negligible amount of heat, resistors are used to downgrade the amount of current supplied to the LED. Therefore there is minimal heat produced by the resistors in the voltage reduction process. Extended periods of illumination may have an adverse effect upon the styrene and FuzznogginCreations will not be responsible for any such neglect. Models that are shipped go through a "burn - in" period where the lighting is left on at my discretion to assure all facets of illumination work properly.
Policy
The basics of Fuzznoggin' Creations Policy is shown below and Fuzznoggin' Creations reserves the right to any changes:
* All prices are in U.S. Currency.
* All prices above cover the cost of special order after-market parts and accurate decals.
* A 50% deposit is required, unless an alternative amount is mutually agreed upon.
* Sound cards are available for sound events (phasers, torpedoes, warp drive, etc)
* Special Effects units for Photon Torpedo Tubes may be added to enhance realism. Inquire for quote prior to build.
* Special Dual Phase Deflector Dish circuitry for select kits. Inquire for quote prior to build.
* Special flasher/strobe circuits are available for most kits.
* Additional desired enhancements to dress up your work of art can be done to your specifications.
* Prices vary from kit to kit. Much of this is due to the amount of detail and lighting that you desire.
*Once an order is submitted, a confirmation email, with Purchase Order, will confirm and lock in your quoted price in the event of a price increase.
* Fuzznoggin' Creations reserves the right to cancel any build at any time.
* Payment due in full within 14 days from the date of final completion.
* Accepted methods of payment are: Cash, Money Order, Certified Check. Sorry, PayPal is no longer accepted.
* All sales are Final - No Exceptions - No Returns
* Sorry, the only International Shipments are to Canada at this time.
All Shipments Are Done Via UPS Next Day Air if over 150 miles from Dulles, VA. Shipments less than 150 from Dulles, VA will be sent via UPS ground or may be picked up from my shop.
Payment Terms Made Simple
Payment is due in full prior to shipment and within 10 business days from the date of completion. Payment may be made either via Pay Pal or Money Order. Shipping cost and packing is additional since I do the packing and shipping via the UPS store. This is for insurance purposes since they pack it; then they are responsible. You have your choice of Air or Ground delivery. I cannot and will not absorb shipping costs, nor split shipping costs due the amount of man hours put into creating your masterpiece. Shipping costs can be relatively high since the models usually meet dimensional weight requirements versus actual weight. The rule of thumb is 15% to 20% of the total build cost is usually what your shipping costs will be.
I ship strictly by UPS Next Day Air if over 150 miles from Dulles VA. I will not risk damages in shipping by sending a quality build long distances over a period of days. Shipments under 150 miles from Dulles, VA are done via UPS Ground or may be picked up from my shop directly. I can personally deliver within 100 miles from Dulles, VA.
The U.S. Postal Service IS NOT a viable shipping option, nor is Fed Ex or DHL.
Time Frame For Builds: I try to spend as much time in a day as possible to assemble your kit as quickly and professionally as possible. But do to family obligations, especially with my children; I cannot knock kits out within 2 or 3 weeks. I do, however, take my time to assure that you are receiving the best possible product I can provide and I'm certain you can understand that. Some kits can take a minimum of 3 months, others much longer. Customers already have been patient and extremely happy with the end product. I will be more than happy to provide you with references.
Hours: 5:00pm to 10:00pm EST - M to F : Closed Holidays
Customer Service Number - (703)-675-0214
Email me or call with any questions you might have
